Mess- und Prüftechnik für
Industrie, Motorsport und Fahrzeugentwicklung

Info
Data
Prices
Download
Sie sind hier: Products > AiM > Earlier products > MXL > MXL Pista

MXL Pista

AIM MXL Pista
AIM MXL Pista
AIM MXL Pista
AIM MXL Pista
AIM MXL Pista
AIM MXL Pista
AIM MXL Pista
AIM MXL Pista
Admeasurements MXL Pista
Admeasurements MXL Pista
MXL Pista is the digital dashboard of AiM with an integrated data logger having an 8 MB flash memory. It has been produced for the application in cars and bikes used for racing.

Alarm lighting AIM MXL
Alarm lighting MXL
MXL Pista has inputs for rpm, speed, lap times, lateral acceleration, battery voltage and 8 freely configurable analogue inputs with a sampling rate up to 500 Hz. Additionally up to 64 channels can be transferred, recorded and partly shown by the CAN-Bus or with a RS 232 from the control unit.

The Version AiM MXL Pista R8 has unlike the standard version no RS 232 interface. Instead it has the possibility, to operate the display sites- and functions over external buttons.

The waterproof (IP 65) aluminum box is very stabile and the connectors on the back of the device are locked vibration-isolated. The display illumination is green with a switch for background illumination.



Logo CAN-Bus Technology
CAN-Bus Technology

Special features MXL

  • 12 freely configurable analogue inputs
  • 10 Shift light
  • 6 alarm lighting 
  • Lap times with up to 5 split times
  • 4 speed inputs
  • Lateral acceleration sensors
  • Gear indication
  • Day- and total odometer
  • 16 MB storage
  • ECU interface (CAN-Bus and RS232)

Connection example AiM MXL Pista

Connection example AIM MXL Pista

Technical data AiM MXL Pista

Tachometer Tapped from the control unit, terminal 1 of the ignition coil or the CAN/RS 232
Measurement range from 0 up to 30.000 rpm
Adjustable end of scale (x1000): 8 – 10 – 12 – 14 - 16 – 20 – 22
Sampling rate 10, 20 or 50 Hz, arbitrary
Freely configurable over-revs-control-LED
Shift light 5 freely configurable LED-pairs: green – green – yellow – red – red
Time measurement Triggered by an infrared transmitter or manual
Lap times without limit, up to 6 intermediate times
Accuracy of measurement: 1/100 sec.
Predictive lap time calculation, updated every 100m
Analogue channels 8 inputs (0-5V)
Thermocouple 0 - 999 °C, measuring accuracy + 0.75%
Thermo resistor up to 180°C, measuring accuracy + 1° 
6 alarms LED’s when the data fall bellow or exceed the set alarm data
Indication in °C or °F
Sampling rate: 1 – 500 Hz, arbitrary
Day- and total odometer
Speed 1 digital Input
Acquisition over an inductive …ABS,..., CAN, 0 – 438, display in km/h or mph
Sampling rate 10, 20 or 50 Hz, free selectable.
Acceleration ± 10 g, integrated into the logger
Sampling rate: 10 – 100 Hz, arbitrary
Gear indication Calculated from rpm and speed, captured from the gear sensor or CAN
Sum-sampling rate 2000 Hz
Connector 1x Binder 711-4 | 1x Binder 711-5 | 1x AMP 12p | 1x AMP 16p | 1x jack plug 3,5 mm
Additional option permanent indication of the fastest lap
Indication of the difference to the fastest lap at the intermediate times
Display pages- and functions controlled by external buttons.
Data memory Non-volatile 8 MB storage,
capacity > 8 hours at 10 Hz,
an additional storage for lap times as well as min- and max data of rpm and temperature from 315 laps
Data transfer Fast USB in less than 20 seconds
Power supply By 12V main power supply
Ignition switch for on and off
No data loss after switching off
Updates Software- and Firmware updates gratis on the internet
Admeasurements Case: 174 x 110 x 26 mm
Display: 140 x 67 mm
Weight 536 gr

Funktions of MXL Pista

Functions of MXL Pista
1 10 Shift lights, in pairs free configurable 2 6 alarm lights, min and max value free configurable 3 Analogue rpm indication, free configurable
4 Speed indication 5 Gear indication 6 Permanent indication of two analogue channels
7 Switchable indication over quit/view button 8 Switchable indication of the analogue channels over >> 9 4 display button with different functions

Inputs of MXL Pista

Inputs of MXL Pista
1 Magnetic or optical lap time input 2 12-pin AMP connector 3 16-pin AMP connector
4 Connection for expansion of the logger by such as displays, MemoryKey,.. 5 Stereo jack 3,5 mm for USB connection 6 Silent blocks with M4 thread for mounting

Accessory for MXL Pista

AIM accessory fastener systems AIM accessory acceleration AIM accessory movement AIM accessory pressure AIM accessory speed AIM accessory hubs AIM accessory cable
Fast. systems Acceleration Movement Pressure Speed Hubs Cable
AIM accessory lap times AIM accessory connector AIM accessory temperature
Lap times Connector Temperature


internal link to the software from memotec internal link to the firmware updates for AIM products external link to our AIM online store

memotec GmbH | Bauwaldstrasse 1 | D-75031 Eppingen | +49.7260.920440 | info@me-mo-tec.de | www.me-mo-tec.de