The fourth generation of the world-wide most sold steering wheel display for the kart sport has been designed in order to rearm the very reasonable basic unit to a complete data recording, without any reconstruction on the hardware.
MyChron 4 2T grows with the aspirations of the driver.
With the new CAN-Bus-technology AIM has provided a huge innovation. The state of art we have temporarily in the automobile manufacture and which is interspersing gradually for the motor bikes area, is now also available for the measurement used for karts:
The network for miscellaneous modules for the different measurements.
Special features MyChron 4
CAN-Bus Technology
- Well readable illuminated display
- Easy handling of the menu navigation in different languages
- Predictive lap time calculation already with the basic equipment
- Fast and convenient data analysis via display, also graphically
- Big storage (1MB), very fast and manageable download
- Long durability of the battery (approx. 200 hours)
- 12V standard connection
- Integrated voltmeter
- Protection class: IP65
- Weight: 293 gram
- Measurement: 125.7 x 87.7 x 20.5 mm
Connection examples AIM MyChron4 2T
Features MyChron 4 2T
Anschlüsse MyChron 4 2T
MyChron 4 2T has an inductive engine speed sensor for 2- and 4-stroke-engines and a lap timer which can alternatively be triggered by a magnetic strip, IR- transmitter or a GPS. You have the ability to transfer the saved data (up to 3 hours, 1024 laps) with an AIM data key to the computer.
The device has an input for water, exhaust gas or spark plug temperature. Additionally it has two warning lamps for temperature and one shift light.
Illumination in green or amber
During a race it shows the driver the most important information with big digits and graphics and gives the mechanical 90% of for him needed information directly over the display, which is deliverable with illumination in green or amber.
As soon as further expansions are connected, it is possible to switch over the buttons >>/OFF the display pages on the bottom left-hand side and the line underneath the rpm over ON/VIEW.
Menu navigation
MyChron 4 2T turns itself automatically on (as soon as the engine is running) and off and is either supplied through a 9V- bloc battery (up to 200 hours) or through the main power supply of the vehicle. In this case the device can also control the board battery voltage as a voltmeter.
The AIM MyChron 4 2T menu navigation was additionally provided with images, which allows a faster navigation to the desired category.
Predictive calculation
Predictive Lap time calculation helps the driver enormously with the decision to stop a moderate qualifying in order to spare the material for a new test.
If there are several magnetic loops set, the AIM MyChron 4 2T shows each time when crossing the time difference to the fastest lap.
Teamlogo
Through the possibility to store the own Team logo (M4 Picture Manager) or the name of the driver, the device doesn’t only get more individually, but also simplifies the allocation and management of the test data on the computer.
You simply upload your desired motive in the Software M4 Picture Manager and this converts it in a readable MyChron 4 2T format. To transfer it to the MC4, the DataKey must be directly (series) connected to the PC and the device.
Analysis
Thanks to the extremely practical analysis functions, data can be shown as a digit, as process or histographical (bar diagram), because every human being has his personal idea, of gathering the dimensions of a measured value.
Each test gets a timestamp from the integrated watch and name of the driver and the track, so it is at any time possible to refer to the corresponding fringe condition.
Accessory for AiM MyChron 4
 |
 |
 |
 |
 |
 |
 |
| Mounting |
RPM |
Data Hub |
Cabel |
Steering |
Lap time |
Connector |
 |
 |
|
|
|
|
|
| Power |
Temperature |
|
|
|
|
|